Begin ottoman with storage and tray removable by cutting your plywood to the desired specifications of your Ottoman. Your plywood for the lid should be larger than the Ottoman base. Then measure and drill holes for the screws. Secure your scews with wood glue. Choose an interior color of paint for the ottoman’s interior. This will be the color you see when you open your new furniture. Here you can also keep your removable tray, books, magazines or anything else you would like to save. Paint the inside of your Ottoman and let it dry.
Cover your Ottoman
First, cut the foam into your ottoman’s lid. Make sure to leave a little extra room with your coating, ideally about 1/4 inch overhang. When you have your ideal piece, glue it to the top of the Ottoman. Next, you will have to pack the entire ottoman in a piece of batting. Cut larger and then trim extra. Next, choose your fabric for your pouf ottomans with storage and tray. The lid must be wrapped and stapled. The Ottoman body can be covered with a slider when sewing two sides of the fabric together.
Finish the Ottoman
For the ottoman’s last step, place the wheels at the bottom of the box. Install the lid hinges with a drill-mark your drilling holes on the smoker’s body and then add your screws. When you are finished you have a practical piece of storage ottoman with reversible top tray furniture for your cave or living room and an extra bit of storage to start.